About ZeroCore

ZeroCore is a custom FDM 3D printing service based in Singapore. We print parts for prototyping, small-batch manufacturing, functional components, replacement parts, architecture models, cosplay props and personalised gifts — and we deliver islandwide.

What we do

We are a print-only service. You bring the model; we turn it into a physical part on production-grade hardware. We do not offer CAD or design services, which means we can keep prices tied to machine time and material rather than billable design hours.

If you are still choosing a material, the materials guide compares everything we stock. If you want to know what a job costs before committing, the pricing page explains how our rates work, and the quote builder prices your actual file in seconds.

How we work

  1. 01

    You upload a model

    Send an STL or 3MF through the site or the Telegram bot. Both formats are accepted; there is no minimum order beyond our standard minimum charge.

  2. 02

    We slice it for a real price

    Your quote is generated by actually slicing the model in Bambu Studio, so the filament weight and print time behind the price are the real ones — not a volume guess. A geometric estimate is used only when slicing is unavailable.

  3. 03

    A human checks it

    Every model is reviewed by hand before it goes on a printer. If a part looks too thin to survive its job, badly oriented, or more expensive than it needs to be, we tell you before printing rather than after.

  4. 04

    We print, then deliver

    Printed on the H2 series, then delivered islandwide or collected. We are a print-only service — we do not model or design parts for you.

The printers we run

We print exclusively on Bambu Lab's H2 series. Running one printer family rather than a mixed fleet is deliberate: it keeps surface finish, tolerances and colour behaviour consistent from one order to the next.

  • Bambu Lab H2D

    Dual-nozzle IDEX, ~325 × 320 × 325 mm build volume, heated chamber for PA/PC/CF.

  • Bambu Lab H2C

    Vortek 8-hotend swap — up to 7 colours with roughly 58% less purge waste.

Read the full breakdown of why we chose the H2 series, including how it compares to typical budget printers.

Materials we stock

We keep six materials in regular rotation, each with a page explaining what it is good and bad at: PLA, PETG, ASA, TPU, Nylon and Polycarbonate.

Choosing between them is usually the single biggest decision in a job — it drives cost, strength and how long the part survives. Our guides on PLA vs PETG and materials for outdoor use cover the two questions we are asked most.

Who writes this site

Bryan Kor

Founder and operator, ZeroCore

Bryan Kor runs ZeroCore day to day. He reviews every model by hand before it prints, chooses the material and orientation for each job, and writes the material and design guides published on this site.

He has been 3D printing since 2022, starting on an Ender 3 V2 doing jobs for friends and family, and now runs the Bambu Lab H2 series. His professional background is in ICT and information security rather than manufacturing — so what you get here is hands-on printing experience built over four years of jobs that worked and jobs that did not, not a materials-engineering qualification. Where a job needs expertise we do not have, we will say so rather than guess.

The guides come out of jobs that actually ran on his machines: the advice on infill, part strength and cost reduction reflects what we see succeed and fail in practice.

Bryan Kor on LinkedIn

Business details & contact

Registered name
ZeroCore
UEN
53518608L
Address
15 Woodlands Ave 6, Singapore 738995
Opening hours
Daily, 9am – 7pm
Service area
Singapore — islandwide delivery or collection
Email
[email protected]
Phone / WhatsApp
+65 8121 0791

Orders are delivered islandwide or collected by arrangement — please message ahead rather than dropping by unannounced. Reviews from past customers are on the homepage, and common questions are answered in the FAQ.