01 / 3D PRINTING SERVICE
Replacement & Spare Part 3D Printing in Singapore
A cracked knob, a snapped clip, a bracket that’s no longer sold on its own — 3D printing lets you replace exactly that one part instead of the whole appliance or fitting. We print replacement and spare parts in Singapore in the material that suits how the part is actually used.
We’re a print-only service: if you already have an STL or 3MF of the part — found online or modelled yourself — upload it for an instant quote. If you don’t, you’ll need to measure and model it first; we don’t offer design or CAD modelling, but free tools make it manageable.
Get an instant quote →Material matched to the part
PETG for everyday toughness, ASA if it lives outdoors or near heat, Nylon for gears, hinges and anything that wears — and PLA for simple, low-stress clips indoors. We’ll flag it if your choice won’t hold up.
Print one part or a few spares
No minimum order — print just the single part you need, or a couple of spares to keep on hand for next time. We can keep your file on record for an easy reorder later.
Checked for fit before printing
Snap-fits, threads and thin clips are checked before anything is printed — we’ll flag a fragile feature or a fit that’s likely to be too tight or too loose.
What we print
- ▸Discontinued knobs, dials and buttons for appliances
- ▸Snapped clips, latches and cabinet fittings
- ▸Brackets, feet and mounting hardware
- ▸Gears, hinges and other wear parts
- ▸Spare parts kept on file for future reorders
Recommended materials
From our workshop
If you’re modelling the part yourself, measure the critical dimensions with a caliper before you start — hole diameters typically print about 0.1–0.2 mm smaller than designed, so allow for that if the part needs to fit a shaft or screw. A quick test print of the fitting area first can save a full reprint later.
Frequently asked questions
I don’t have an STL of the broken part — can you model it for me?
We’re print-only and don’t offer design or modelling services. Check Printables, Thingiverse, MakerWorld or Thangs first — the exact part may already exist. If not, free tools like TinkerCAD (simple shapes) or Fusion 360 and Onshape (more complex parts) can get you a model from careful measurements.
What material should I use for an appliance knob or bracket?
It depends on where it lives. PETG is a solid general-purpose choice, ASA if it’s outdoors or near heat, and Nylon for gears or hinges that flex and wear. Avoid PLA anywhere near heat — it softens from around 60 °C, so it’s fine for a cabinet clip but not an oven knob.
Will the replacement part actually fit?
Typical accuracy is around ±0.2–0.5 mm, and holes print slightly smaller than designed (about 0.1–0.2 mm), which usually needs accounting for in the model. For a critical fit, we’d recommend a single test print of the fitting area before committing to the full part.
Is there a minimum order for a single replacement part?
No minimum — we print one-off replacement parts as often as batches. We can keep your file on hand too, so reordering the same part later, if it breaks again, is quick.
Related services
Custom Keychains
Design and print custom keychains in Singapore. Logos, names, mascots and event giveaways in durable PLA or PETG — small batches to bulk, with same-day quotes.
Rapid Prototyping
Fast 3D-printed prototypes and functional parts in Singapore. Iterate designs, test fit and form, and print end-use brackets, enclosures and jigs in PLA, PETG, ASA and PC.
Bulk & Batch Printing
Bulk and batch 3D printing in Singapore for events, giveaways and branded merch. Print dozens to hundreds of identical parts with automatic quantity discounts and islandwide delivery.
Ready to print?
Upload your STL or 3MF file and get an instant quote in seconds.