[{"data":1,"prerenderedAt":322},["ShallowReactive",2],{"blog-post-cheap-vs-reliable-3d-printing-the-real-cost":3,"blog-posts":17},{"slug":4,"category":5,"date":6,"description":7,"image":8,"readTime":9,"tags":10,"title":15,"bodyHtml":16},"cheap-vs-reliable-3d-printing-the-real-cost","Guides","2026-10-13","The cheapest quote isn't always the cheapest print. How reprints, failed fits, delays and your own time add up, and how to keep the total down.","\u002Fimages\u002Fblog\u002Fcheap-vs-reliable-3d-printing-the-real-cost.png","6 min read",[11,12,13,14],"pricing","reliability","reprints","value","Cheap vs Reliable 3D Printing: The Real Cost of a Print","\u003Cp>The cheapest quote isn't always the cheapest print. A part that fails, doesn't fit or turns up late costs you more than its price: you pay again, you wait again, and you spend your own time sorting it out.\u003C\u002Fp>\n\u003Cp>This post looks at the total cost of a 3D print, not just the number on the quote. It covers where the hidden costs come from, a simple illustration of one good print against three cheap ones, and how we try to keep the total low rather than just the sticker price.\u003C\u002Fp>\n\u003Ch2 id=\"the-price-is-only-part-of-the-cost\">The price is only part of the cost\u003C\u002Fh2>\n\u003Cp>When you compare 3D printing quotes, you're really comparing what it takes to end up with a part that works. That total has five parts:\u003C\u002Fp>\n\u003Ctable>\n  \u003Cthead>\n    \u003Ctr>\u003Cth>Cost\u003C\u002Fth>\u003Cth>What it looks like\u003C\u002Fth>\u003Cth>Who pays\u003C\u002Fth>\u003C\u002Ftr>\n  \u003C\u002Fthead>\n  \u003Ctbody>\n    \u003Ctr>\u003Ctd>The print itself\u003C\u002Ftd>\u003Ctd>Material and machine time\u003C\u002Ftd>\u003Ctd>You, once or several times\u003C\u002Ftd>\u003C\u002Ftr>\n    \u003Ctr>\u003Ctd>Reprints\u003C\u002Ftd>\u003Ctd>The part warps, snaps or prints badly and has to be done again\u003C\u002Ftd>\u003Ctd>You, unless the service covers it\u003C\u002Ftd>\u003C\u002Ftr>\n    \u003Ctr>\u003Ctd>Failed fits\u003C\u002Ftd>\u003Ctd>The part prints fine but doesn't fit what it's meant to fit\u003C\u002Ftd>\u003Ctd>Usually you\u003C\u002Ftd>\u003C\u002Ftr>\n    \u003Ctr>\u003Ctd>Delays\u003C\u002Ftd>\u003Ctd>A missed demo, a machine left down, a deadline pushed back\u003C\u002Ftd>\u003Ctd>You, often more than the print cost\u003C\u002Ftd>\u003C\u002Ftr>\n    \u003Ctr>\u003Ctd>Your time\u003C\u002Ftd>\u003Ctd>Chasing replies, re-measuring, re-ordering, collecting twice\u003C\u002Ftd>\u003Ctd>Always you\u003C\u002Ftd>\u003C\u002Ftr>\n  \u003C\u002Ftbody>\n\u003C\u002Ftable>\n\u003Cp>Only the first row shows up on a quote. The other four only show up when something goes wrong.\u003C\u002Fp>\n\u003Ch2 id=\"illustration-one-good-print-vs-three-failed-cheap-ones\">Illustration: one good print vs three failed cheap ones\u003C\u002Fh2>\n\u003Cp>\u003Cstrong>The figures below are made up to show the arithmetic. They aren't our prices or anyone else's.\u003C\u002Fstrong> For real numbers, see \u003Ca href=\"\u002Fblog\u002Fhow-much-does-3d-printing-cost-in-singapore\">how much 3D printing costs in Singapore\u003C\u002Fa>.\u003C\u002Fp>\n\u003Cp>Say you need a bracket that holds a sensor near a warm motor.\u003C\u002Fp>\n\u003Ctable>\n  \u003Cthead>\n    \u003Ctr>\u003Cth>Example only\u003C\u002Fth>\u003Cth>Option A: cheapest quote\u003C\u002Fth>\u003Cth>Option B: checked first\u003C\u002Fth>\u003C\u002Ftr>\n  \u003C\u002Fthead>\n  \u003Ctbody>\n    \u003Ctr>\u003Ctd>Quoted price\u003C\u002Ftd>\u003Ctd>$10\u003C\u002Ftd>\u003Ctd>$15\u003C\u002Ftd>\u003C\u002Ftr>\n    \u003Ctr>\u003Ctd>Attempt 1\u003C\u002Ftd>\u003Ctd>Printed in PLA, sags near the motor\u003C\u002Ftd>\u003Ctd>File checked, material changed for heat, fits first time\u003C\u002Ftd>\u003C\u002Ftr>\n    \u003Ctr>\u003Ctd>Attempt 2\u003C\u002Ftd>\u003Ctd>Reprinted in PETG, holes too tight\u003C\u002Ftd>\u003Ctd>Not needed\u003C\u002Ftd>\u003C\u002Ftr>\n    \u003Ctr>\u003Ctd>Attempt 3\u003C\u002Ftd>\u003Ctd>Holes enlarged, finally fits\u003C\u002Ftd>\u003Ctd>Not needed\u003C\u002Ftd>\u003C\u002Ftr>\n    \u003Ctr>\u003Ctd>Total paid\u003C\u002Ftd>\u003Ctd>$30\u003C\u002Ftd>\u003Ctd>$15\u003C\u002Ftd>\u003C\u002Ftr>\n    \u003Ctr>\u003Ctd>Time to a working part\u003C\u002Ftd>\u003Ctd>Three rounds of ordering and waiting\u003C\u002Ftd>\u003Ctd>One\u003C\u002Ftd>\u003C\u002Ftr>\n  \u003C\u002Ftbody>\n\u003C\u002Ftable>\n\u003Cp>Option A looked a third cheaper and ended up costing double, before you count the days. The point isn't the exact numbers. It's that the cost of a print is the cost of getting to a part that works.\u003C\u002Fp>\n\u003Ch2 id=\"where-cheap-prints-usually-go-wrong\">Where cheap prints usually go wrong\u003C\u002Fh2>\n\u003Ch3 id=\"material-picked-on-price-alone\">Material picked on price alone\u003C\u002Fh3>\n\u003Cp>PLA is the most affordable material and great for display pieces and prototypes. It also softens around 55 to 60 °C, which a car parked in the Singapore sun can easily reach. Using it for the wrong job is the most common reason a cheap print fails. Our \u003Ca href=\"\u002Fblog\u002Fpla-vs-petg-which-material-should-you-choose\">PLA vs PETG guide\u003C\u002Fa> explains the trade-off.\u003C\u002Fp>\n\u003Ch3 id=\"no-one-looked-at-the-file\">No one looked at the file\u003C\u002Fh3>\n\u003Cp>Walls under 0.8 mm are fragile. Holes usually print 0.1 to 0.2 mm smaller than designed. Typical tolerances are ±0.2 to 0.5 mm. If nobody checks the file before printing, these show up after you've paid.\u003C\u002Fp>\n\u003Ch3 id=\"a-rough-estimate-instead-of-a-real-price\">A rough estimate instead of a real price\u003C\u002Fh3>\n\u003Cp>Some quotes are guesses based on the size of the part. If the real print uses more material or time, the price can change, or corners get cut to hit the guess.\u003C\u002Fp>\n\u003Ch3 id=\"no-cover-when-it-s-wrong\">No cover when it's wrong\u003C\u002Fh3>\n\u003Cp>If a print arrives defective and the service won't reprint it, you pay for the same part twice.\u003C\u002Fp>\n\u003Ch3 id=\"a-real-example\">A real example\u003C\u002Fh3>\n\u003Cp>A customer brought us this part after another print service told them it was normal. It isn't. The sloped faces are covered in loose strands, curled edges and rough, stringy patches. Those are typical signs of overhangs printed without the right support or orientation. A part like this has to be printed again, so the cheap price ends up paid twice.\u003C\u002Fp>\n\u003Cp>\u003Cimg src=\"\u002Fimages\u002Fblog\u002Ffailed-print-competitor-underside.jpg\" alt=\"A black 3D printed cone-shaped part with loose strands and rough, stringy surfaces across its sloped face\">\u003C\u002Fp>\n\u003Cp>\u003Cem>A customer's part from another print service. We would not ship a print like this.\u003C\u002Fem>\u003C\u002Fp>\n\u003Ch2 id=\"how-we-try-to-keep-the-total-cost-down\">How we try to keep the total cost down\u003C\u002Fh2>\n\u003Cp>We're not the cheapest option for every job, and we don't try to be. We try to make the first print the right one.\u003C\u002Fp>\n\u003Cul>\n  \u003Cli>\u003Cstrong>Slicer-exact pricing.\u003C\u002Fstrong> We slice your actual file with the same settings we print with, and price it from the material used and the machine time. No volume guess.\u003C\u002Fli>\n  \u003Cli>\u003Cstrong>A human check before printing.\u003C\u002Fstrong> Every model is reviewed by hand. If a part looks too thin for its job, badly oriented or more expensive than it needs to be, we tell you before it prints.\u003C\u002Fli>\n  \u003Cli>\u003Cstrong>Material advice.\u003C\u002Fstrong> Tell us where the part will live and what it has to do, and we'll suggest the material that will survive it.\u003C\u002Fli>\n  \u003Cli>\u003Cstrong>Sample prints for batches.\u003C\u002Fstrong> Before a larger run, you can order one piece first at the normal price, test it, then order the rest.\u003C\u002Fli>\n  \u003Cli>\u003Cstrong>Free reprint within 30 days.\u003C\u002Fstrong> If a print is wrong or defective, report it from your order page and we reprint it at no cost, or refund you if a reprint won't put it right.\u003C\u002Fli>\n  \u003Cli>\u003Cstrong>Honest dates.\u003C\u002Fstrong> Rush charges, if any, are agreed upfront. If we can't hit your date, we'll say so before you pay.\u003C\u002Fli>\n\u003C\u002Ful>\n\u003Cp>One limit worth being clear about: the free reprint covers prints that are wrong. It doesn't cover a part that printed exactly as modelled from your design but doesn't fit. That's why the file check matters. It catches fit problems before they cost you anything.\u003C\u002Fp>\n\u003Ch2 id=\"ways-to-get-a-lower-price-without-a-riskier-print\">Ways to get a lower price without a riskier print\u003C\u002Fh2>\n\u003Cp>Cheaper doesn't have to mean less reliable. These cut cost without cutting corners:\u003C\u002Fp>\n\u003Cul>\n  \u003Cli>Hollow out solid sections where strength isn't needed.\u003C\u002Fli>\n  \u003Cli>Avoid walls thicker than the job needs.\u003C\u002Fli>\n  \u003Cli>Reduce the size if exact dimensions don't matter.\u003C\u002Fli>\n  \u003Cli>Cut down on overhangs that need supports, since supports add material.\u003C\u002Fli>\n  \u003Cli>Use PLA where it genuinely suits the job, like indoor display parts.\u003C\u002Fli>\n  \u003Cli>Order several copies together. Quantity discounts apply automatically.\u003C\u002Fli>\n\u003C\u002Ful>\n\u003Cp>More ideas in \u003Ca href=\"\u002Fblog\u002Freducing-3d-printing-costs-tips-for-smarter-designs\">reducing 3D printing costs\u003C\u002Fa>.\u003C\u002Fp>\n\u003Ch2 id=\"questions-to-ask-any-3d-printing-service\">Questions to ask any 3D printing service\u003C\u002Fh2>\n\u003Cp>Whoever you use, these questions tell you what the real cost is likely to be:\u003C\u002Fp>\n\u003Col>\n  \u003Cli>Is the price from slicing my file, or an estimate?\u003C\u002Fli>\n  \u003Cli>Will someone check my file before printing?\u003C\u002Fli>\n  \u003Cli>What happens if the print is wrong or defective?\u003C\u002Fli>\n  \u003Cli>Will you tell me if my material choice won't survive the job?\u003C\u002Fli>\n  \u003Cli>Can I order one piece first before a batch?\u003C\u002Fli>\n  \u003Cli>If you can't meet my date, when will I find out?\u003C\u002Fli>\n\u003C\u002Fol>\n\u003Ch2 id=\"quick-faq\">Quick FAQ\u003C\u002Fh2>\n\u003Ch3 id=\"are-you-the-cheapest-3d-printing-service-in-singapore\">Are you the cheapest 3D printing service in Singapore?\u003C\u002Fh3>\n\u003Cp>Not always, and we don't aim to be. We aim for the lowest total cost to a part that works. Upload your file to see the exact price.\u003C\u002Fp>\n\u003Ch3 id=\"what-does-the-free-reprint-cover\">What does the free reprint cover?\u003C\u002Fh3>\n\u003Cp>Prints that are wrong or defective, reported within 30 days of collection or delivery. The full policy is on our \u003Ca href=\"\u002Freturns\">returns page\u003C\u002Fa>.\u003C\u002Fp>\n\u003Ch3 id=\"can-i-test-one-part-before-ordering-a-batch\">Can I test one part before ordering a batch?\u003C\u002Fh3>\n\u003Cp>Yes. Order one piece first at the normal price, check it, then order the rest.\u003C\u002Fp>\n\u003Ch3 id=\"will-my-price-change-after-i-order\">Will my price change after I order?\u003C\u002Fh3>\n\u003Cp>Your price comes from slicing your file and is shown before you pay. If we suggest a change, like a different material, you'll see the new price before deciding.\u003C\u002Fp>\n\u003Cblockquote>\u003Cp>See what your part really costs. \u003Ca href=\"\u002Fcreate\">Get an instant quote\u003C\u002Fa> from your actual file.\u003C\u002Fp>\u003C\u002Fblockquote>",[18,29,39,51,64,66,77,87,101,111,120,130,138,149,158,167,180,191,202,208,217,227,234,244,256,263,272,280,290,300,307,315],{"slug":19,"category":20,"date":6,"description":21,"image":22,"readTime":9,"tags":23,"title":28},"3d-printing-for-classrooms-and-med-tech-prototyping","Business","What FDM printing does well for schools and med-tech R&D: teaching models, class sets, device enclosures, rigs and fixtures, and ordering via Vendors@Gov.","\u002Fimages\u002Fblog\u002F3d-printing-for-classrooms-and-med-tech-prototyping.png",[24,25,26,27],"education","med-tech","prototyping","Vendors@Gov","3D Printing for Classrooms and Med-Tech Prototyping",{"slug":30,"category":20,"date":6,"description":31,"image":32,"readTime":9,"tags":33,"title":38},"3d-printing-for-government-schools-and-companies","Buying 3D printing for an agency, school or company: Vendors@Gov, SAP Ariba IDs, POs, itemised quotes and invoices, deposits, tracking and reorders.","\u002Fimages\u002Fblog\u002F3d-printing-for-government-schools-and-companies.png",[34,27,35,36,37],"procurement","SAP Ariba","business","schools","3D Printing for Government, Schools and Companies in Singapore",{"slug":40,"category":5,"date":6,"description":41,"image":42,"readTime":43,"tags":44,"title":50},"3d-printing-in-singapore-courses-services-how-to-get-started","Where to learn 3D printing in Singapore, what local print services can do, and when to buy your own printer, from free NLB workshops to industrial parts.","\u002Fimages\u002Fblog\u002F3d-printing-in-singapore-courses-services-how-to-get-started.png","8 min read",[45,46,47,48,49],"beginners","courses","3D printing service","Singapore","industrial","3D Printing in Singapore: Courses, Services and How to Get Started",{"slug":52,"category":5,"date":53,"description":54,"image":55,"readTime":56,"tags":57,"title":62,"updated_at":63},"3d-printing-infill-explained","2026-05-09","Infill controls a print's strength, weight, print time and cost. A material-by-material guide to infill percentage and patterns, with a quick-reference table.","\u002Fimages\u002Fblog\u002F3d-printing-infill-explained.png","9 min read",[58,59,60,61],"infill","strength","cost saving","design tips","3D Printing Infill Explained: How Much Do You Really Need?","2026-08-22T00:00:00Z",{"slug":4,"category":5,"date":6,"description":7,"image":8,"readTime":9,"tags":65,"title":15},[11,12,13,14],{"slug":67,"category":5,"date":6,"description":68,"image":69,"readTime":43,"tags":70,"title":76},"designing-jigs-and-fixtures-for-fdm","How to design 3D-printed jigs, fixtures and soft jaws: material choice, clearances, 3-2-1 location, dowels, inserts and getting them printed fast.","\u002Fimages\u002Fblog\u002Fdesigning-jigs-and-fixtures-for-fdm.png",[71,72,73,74,75],"jigs","fixtures","design","functional parts","materials","Designing Jigs and Fixtures for FDM 3D Printing",{"slug":78,"category":5,"date":6,"description":79,"image":80,"readTime":9,"tags":81,"title":86},"fdm-design-reference-tolerances-clearances-walls","Reference tables for FDM design: tolerances, hole undersize, press, slip and snap fits, wall thickness, threads, build size and material heat limits.","\u002Fimages\u002Fblog\u002Ffdm-design-reference-tolerances-clearances-walls.png",[73,82,83,84,85],"tolerances","clearances","wall thickness","threads","FDM Design Reference: Tolerances, Clearances and Wall Thickness",{"slug":88,"category":89,"date":90,"description":91,"image":92,"readTime":93,"tags":94,"title":100,"updated_at":63},"fdm-vs-resin-3d-printing-which-to-choose","Materials","2026-05-27","FDM and resin (SLA) printing produce very different results. Compare strength, detail, cost and use cases to pick the right process for your project.","\u002Fimages\u002Fblog\u002Ffdm-vs-resin-3d-printing-which-to-choose.png","7 min read",[95,96,97,98,99],"FDM","resin","SLA","comparison","detail","FDM vs Resin 3D Printing: Which Should You Choose?",{"slug":102,"category":5,"date":6,"description":103,"image":104,"readTime":93,"tags":105,"title":110},"fdm-vs-sla-vs-sls-vs-mjf-vs-metal-singapore","A decision table for choosing between FDM, SLA, SLS, MJF and metal 3D printing in Singapore, plus what to ask a provider for each process.","\u002Fimages\u002Fblog\u002Ffdm-vs-sla-vs-sls-vs-mjf-vs-metal-singapore.png",[106,95,107,108,109],"processes","SLS","MJF","metal printing","FDM vs SLA vs SLS vs MJF vs Metal: Which 3D Printing Process?",{"slug":112,"category":5,"date":6,"description":113,"image":114,"readTime":9,"tags":115,"title":119},"free-file-check-before-you-print","Every file gets a free human check before printing. What we look at, how to flag critical dimensions, the tweaks we suggest and how to send revisions.","\u002Fimages\u002Fblog\u002Ffree-file-check-before-you-print.png",[116,117,82,118],"file check","design for FDM","file prep","Our Free File Check: What We Look At Before You Print",{"slug":121,"category":20,"date":6,"description":122,"image":123,"readTime":93,"tags":124,"title":129},"from-prototype-to-small-batch-production","When an FDM batch beats injection moulding, how to keep reorders consistent, checking a first article, bulk pricing and planning a production run.","\u002Fimages\u002Fblog\u002Ffrom-prototype-to-small-batch-production.png",[125,126,127,128,26],"small batch","production","bulk","reorders","From Prototype to Small-Batch Production with FDM",{"slug":131,"category":5,"date":6,"description":132,"image":133,"readTime":93,"tags":134,"title":137},"functional-vs-visual-3d-prints","A part that has to work and a part that has to look good need different materials, orientation and settings. Here's what changes and what to tell us.","\u002Fimages\u002Fblog\u002Ffunctional-vs-visual-3d-prints.png",[74,135,75,136],"display models","orientation","Functional vs Visual 3D Prints: What Changes and How to Tell Us",{"slug":139,"category":5,"date":140,"description":141,"image":142,"readTime":143,"tags":144,"title":147,"updated_at":148},"how-much-does-3d-printing-cost-in-singapore","2026-05-20","What 3D printing actually costs in Singapore — real material rates, the minimum order and delivery fee, plus two worked examples, so you know what to expect.","\u002Fimages\u002Fblog\u002Fhow-much-does-3d-printing-cost-in-singapore.png","12 min read",[11,145,48,146,45],"cost","quote","How Much Does 3D Printing Cost in Singapore?","2026-07-31T00:00:00Z",{"slug":150,"category":5,"date":6,"description":151,"image":152,"readTime":9,"tags":153,"title":157},"how-ordering-works-upload-quote-pay-track","Our order flow step by step: an instant slicer-based quote, what drives the price, what a person checks, PayNow payment and tracking on your order page.","\u002Fimages\u002Fblog\u002Fhow-ordering-works-upload-quote-pay-track.png",[154,11,155,156],"ordering","PayNow","order tracking","How Ordering Works: Upload, Quote, Pay and Track",{"slug":159,"category":5,"date":160,"description":161,"image":162,"readTime":43,"tags":163,"title":166,"updated_at":63},"how-strong-are-3d-printed-parts","2026-05-23","Can 3D-printed parts handle real loads? Learn what determines strength — material, infill, walls and orientation — and how to design parts that hold up.","\u002Fimages\u002Fblog\u002Fhow-strong-are-3d-printed-parts.png",[59,164,58,136,165],"durability","engineering","How Strong Are 3D-Printed Parts?",{"slug":168,"category":5,"date":169,"description":170,"image":171,"readTime":172,"tags":173,"title":179},"how-to-3d-print-your-fyp-or-school-project","2026-09-30","Getting an FYP prototype, D&T coursework piece or architecture model 3D printed in Singapore: file prep, scale, keeping costs down and meeting deadlines.","\u002Fimages\u002Fblog\u002Fhow-to-3d-print-your-fyp-or-school-project.png","4 min read",[174,175,176,177,178],"FYP","coursework","architecture models","school projects","budget","How to 3D Print Your FYP, Coursework or Architecture Model in Singapore",{"slug":181,"category":5,"date":169,"description":182,"image":183,"readTime":172,"tags":184,"title":190},"how-to-convert-step-to-stl","Convert STEP to STL in Fusion 360, SolidWorks, Onshape or FreeCAD with the right tolerance settings, or skip it and upload the STEP file directly.","\u002Fimages\u002Fblog\u002Fhow-to-convert-step-to-stl.png",[185,186,187,188,189],"STEP","STL","CAD","file format","export","How to Convert STEP to STL (and When You Don’t Need To)",{"slug":192,"category":5,"date":169,"description":193,"image":194,"readTime":195,"tags":196,"title":201},"how-to-get-a-makerworld-model-printed-in-singapore","No 3D printer? Paste a MakerWorld, Printables or Thingiverse link and get it printed in Singapore. How to pick the file, check the licence and choose a material.","\u002Fimages\u002Fblog\u002Fhow-to-get-a-makerworld-model-printed-in-singapore.png","5 min read",[197,198,199,200,45],"MakerWorld","Printables","Thingiverse","licence","How to Get a MakerWorld, Printables or Thingiverse Model Printed in Singapore",{"slug":203,"category":5,"date":169,"description":204,"image":205,"readTime":172,"tags":206,"title":207},"how-to-get-something-3d-printed-in-singapore","Getting something 3D printed in Singapore from start to finish: getting a file, choosing a material, cost, ordering, payment and collection or delivery.","\u002Fimages\u002Fblog\u002Fhow-to-get-something-3d-printed-in-singapore.png",[45,47,48,75,11],"How to Get Something 3D Printed in Singapore: A Step-by-Step Guide",{"slug":209,"category":5,"date":210,"description":211,"image":212,"readTime":9,"tags":213,"title":216},"how-to-prepare-stl-files-for-3d-printing","2025-03-28","Everything you need to know about exporting, checking, and fixing STL files before sending them for 3D printing. Avoid common mistakes that cause failed prints.","\u002Fimages\u002Fblog\u002Fhow-to-prepare-stl-files-for-3d-printing.png",[186,214,45,215],"file preparation","3MF","How to Prepare STL Files for 3D Printing: A Beginner's Guide",{"slug":218,"category":20,"date":6,"description":219,"image":220,"readTime":9,"tags":221,"title":226},"how-we-keep-prints-on-time-and-on-spec","Honest dates from a live calendar, a hand check on every file, order page updates and a free reprint within 30 days. What we do, and what we don't promise.","\u002Fimages\u002Fblog\u002Fhow-we-keep-prints-on-time-and-on-spec.png",[222,223,224,225],"quality","turnaround","reprint guarantee","communication","How We Keep Prints On Time and On Spec",{"slug":228,"category":5,"date":6,"description":229,"image":230,"readTime":9,"tags":231,"title":233},"iterating-a-part-v1-v2-v3-with-fdm","Running a prototype loop with FDM: what each version should test, which material to use, and what to change when a part doesn't fit or breaks.","\u002Fimages\u002Fblog\u002Fiterating-a-part-v1-v2-v3-with-fdm.png",[26,117,75,232],"iteration","Iterating a Part with FDM: v1, v2, v3",{"slug":235,"category":5,"date":169,"description":236,"image":237,"readTime":172,"tags":238,"title":243},"lithophanes-guide-choosing-the-right-photo","How 3D-printed lithophanes work, which photos turn out best, sizes and prices in Singapore, and how to light and display one.","\u002Fimages\u002Fblog\u002Flithophanes-guide-choosing-the-right-photo.png",[239,240,241,242],"lithophane","gifts","photo","PLA","Lithophanes: What They Are and How to Choose the Right Photo",{"slug":245,"category":89,"date":246,"description":247,"image":248,"readTime":172,"tags":249,"title":255},"outdoor-3d-prints-choosing-the-right-material","2025-04-10","Not all 3D printing materials survive outdoors. Learn which filaments handle UV, rain, and heat — and which ones will warp, fade, or crack.","\u002Fimages\u002Fblog\u002Foutdoor-3d-prints-choosing-the-right-material.png",[250,251,252,253,254],"outdoor","ASA","PETG","UV resistance","weathering","Outdoor 3D Prints: Choosing the Right Material for Sun and Rain",{"slug":257,"category":89,"date":258,"description":259,"image":260,"readTime":195,"tags":261,"title":262},"pla-vs-petg-which-material-should-you-choose","2025-03-15","A practical comparison of PLA and PETG — the two most popular FDM materials. Learn when to use each based on strength, heat resistance, and application.","\u002Fimages\u002Fblog\u002Fpla-vs-petg-which-material-should-you-choose.png",[242,252,75,98],"PLA vs PETG: Which 3D Printing Material Should You Choose?",{"slug":264,"category":5,"date":265,"description":266,"image":267,"readTime":195,"tags":268,"title":271},"reducing-3d-printing-costs-tips-for-smarter-designs","2025-04-22","Simple design changes that can cut your 3D printing costs significantly. Learn about wall thickness, infill, orientation, and support optimisation.","\u002Fimages\u002Fblog\u002Freducing-3d-printing-costs-tips-for-smarter-designs.png",[60,61,58,269,270],"supports","optimisation","Reducing 3D Printing Costs: Tips for Smarter Designs",{"slug":273,"category":5,"date":274,"description":275,"image":276,"readTime":277,"tags":278,"title":279,"updated_at":63},"stl-vs-3mf-which-file-format-to-use","2026-05-16","STL is the classic 3D printing format, but 3MF carries units, colour and multi-part data. How they differ, how to export each, and which to send us.","\u002Fimages\u002Fblog\u002Fstl-vs-3mf-which-file-format-to-use.png","10 min read",[186,215,188,189,187],"STL vs 3MF: Which 3D Printing File Format Should You Use?",{"slug":281,"category":5,"date":282,"description":283,"image":284,"readTime":56,"tags":285,"title":289,"updated_at":148},"what-can-you-3d-print-real-world-ideas","2026-05-29","From replacement parts to custom gifts, real ideas for what to 3D print in Singapore — grouped by use case, matched to materials, with real workshop examples.","\u002Fimages\u002Fblog\u002Fwhat-can-you-3d-print-real-world-ideas.png",[286,287,45,288],"ideas","inspiration","use cases","What Can You 3D Print? 15 Real-World Ideas",{"slug":291,"category":292,"date":6,"description":293,"image":294,"readTime":93,"tags":295,"title":299},"what-customers-say-about-zerocore","News","Real reviews from ZeroCore customers, quoted as written: communication, speed, quality and going above and beyond, plus the jobs behind them.","\u002Fimages\u002Fblog\u002Fwhat-customers-say-about-zerocore.png",[296,297,298,48],"reviews","customer stories","portfolio","What Customers Say About ZeroCore: Real Reviews and Real Jobs",{"slug":301,"category":20,"date":6,"description":302,"image":303,"readTime":9,"tags":304,"title":306},"what-zerocore-prints-best-functional-fdm-parts","Jigs, fixtures, brackets, housings, snap fits and replacement parts: what we're built for, materials by job, achievable tolerances and what we don't do.","\u002Fimages\u002Fblog\u002Fwhat-zerocore-prints-best-functional-fdm-parts.png",[74,75,82,305],"capabilities","What ZeroCore Prints Best: Functional FDM Parts",{"slug":308,"category":292,"date":169,"description":309,"image":310,"readTime":195,"tags":311,"title":314},"whats-new-at-zerocore-september-2026","Paste a MakerWorld or Printables link, upload STEP, IGES or OBJ files, map multi-colour 3MFs and track every order. Everything new on zerocore.sg.","\u002Fimages\u002Fblog\u002Fwhats-new-at-zerocore-september-2026.png",[312,197,185,313,156],"updates","multi-colour","What’s New at ZeroCore: Link Imports, STEP Uploads, Colour Slots and More",{"slug":316,"category":5,"date":6,"description":317,"image":318,"readTime":93,"tags":319,"title":321},"why-we-sometimes-say-no-to-a-print","We won't take your money for a print that will fail. What makes us flag a file, from thin walls to the wrong material, and what happens next.","\u002Fimages\u002Fblog\u002Fwhy-we-sometimes-say-no-to-a-print.png",[117,75,116,320],"process choice","Why We Sometimes Say No to a Print (and What Happens Next)",1791896131691]